Lots of 2.8 and 3.1 Chevy V6 Engine Parts

I now have three complete Chevy 60 degree V6 engines. I will be rebuilding a couple of them. I have two 1999 3.1 and one 1984 2.8 liter motors. I am not sure if I need to get rid of any of them. Hear is a picture of what I have.

Lots of 2.8 and 3.1 Chevy V6 Parts

The Engine is Out!

I finally got the engine and transmission out of my blazer. I was held up by the nasty cold weather we got but we're back in the 50's for now so I got the engine pulled. I've got a lot of clean up work to do on the engine bay but I look forward to it.

2.8 Chevy V6 and Borg Warner T4

!984 Blazer Empty Engine Compartment

1984 Blazer Riding High in the Front

1984 S10 Blazer Transfer Case

I removed the transfer case today. It went pretty well, I have been getting lots of help form the guys over at the 60 Degree V6 forum. They are all super helpful. Here's a link to the site http://60degreev6.com/. It is well worth your time to sign up and be a member. Here are some pics of the transfer case.

New 3.1 Chevy Pistons, 3100

I finally got some new pistons for the 3.1 (3100) engines I am re-building. They are .020" over so the block will need machining as well.

2.8 Chevy V6 Teardown - Almost Done

It's been going a little slow on pulling the engine from the S10 Blazer. I finally got some time today and pulled the intake manifold and both heads. This was hard to do today because it was a high of 27 degrees. My fingers are still numb.

2.8 Chevy V6 60 degree

2.8 Chevy V6 Iron Heads

2.8 Chevy V6 Long Block

FREE Plans for the Chevy Wrist Pin Press

Here are the simple plans.


Chevy V6 Piston Wrist Pin Press DIY Homemade

DIY Chevy Piston Pin Press

Hi All,

Here are some pictures of the Chevy 60 Degree V6 Wrist Pin Piston Press. It works great and was easy to build. Take a look.